24V Flexible Curved System Enlarge

Magnetic systems Magnetic system Zambelis

24V Flexible Curved System

24V DC
low voltage — needs a power supply
8 parts
2 rails · 4 luminaires
Zambelis
maker
Build this system All parts Luminaires from 37.00 €

This system's rails, luminaires and connectors only fit each other — parts of other systems will not fit.

24V Flexible Curved System runs on 24V DC. The rail carries the power, and luminaires clip anywhere along it and can be moved later without rewiring. That is low voltage, so the system needs a driver rated above the total wattage of the luminaires. Mounting: surface.

  1. 1 A rail for the length Segments join up to the length you need
  2. 2 Luminaires on the rail How many and which — by the area to light
  3. 3 Power and connectors for the shape Chosen by luminaire load and rail shape

Rails 2

Rail sections — the length is made up of several.

Luminaires 4

Choose how many light modules you want and which ones.

Power supplies 2

This system needs a power supply.

Accessories 0

Power feeds, end caps and mounting parts.

This part is not offered online right now — write to us and we will pick one.

What a complete system needs

  • rail — as many metres as the line is long
  • luminaires — as much light as the room needs
  • a driver and a feed

Frequently asked questions

What voltage is this system, and does it need a driver?

The system runs on 24V DC, so it will not work without a driver. The driver is sized from the total wattage of the luminaires with headroom — the configurator works that out for you.

How is this system mounted?

Its rails mount as follows: surface. You choose the mounting in the configurator, and both the rails and the accessories follow from it.

Will luminaires from another system fit?

No. This system's rail profile and contacts are its own, so a luminaire from another system will not physically fit. Every part of it sits on this page — rails, luminaires, joints and power.

How do I work out which parts I need?

In the configurator you give the mounting and the shape segment by segment and add luminaires — the rails, joints, end caps and power are worked out for you, and the quantities stay editable before the cart.