Magnetic Track

In a magnetic system the luminaires are held by magnets and slide by hand; the systems run on low voltage, so each needs a driver. Each system's parts fit only each other — a luminaire or joint from another system will not physically fit, so pick within one system.

Magnetic 48V 8 Magnetic 24V 3 Modular 1

Magnetic 48V 8

Safe low voltage, luminaires hold by magnet — reposition them by hand.

Magnetic 24V 3

The slimmest profiles for smaller spaces and furniture.

Modular 1

Not a rail but a kit: a base with modules, or panels with connectors — the shape is assembled from parts.

Not sure which system to choose, or how much track you need?

Compare the systems Build a system

What a complete system needs

  • a rail or a base — as long as the line
  • luminaires or modules — as much light as the room needs
  • joints where the line turns or branches
  • a feed, plus a driver for the low-voltage systems
  • end caps at the ends

Frequently asked questions

Which systems are in this section?

It currently holds 12 systems: 48V Magnetic System 3MM, 48V Magnetic System 5MM, 48V Ultra Slim Magnetic 15MM, 48V Linear Magnetic System and others. Each has its own rails, luminaires and joints, and parts are combined within one system only.

What voltage do these systems run on?

This section has systems at 24V DC, 48V DC. The low-voltage ones (48 V, 24 V) need a driver; the 230 V ones connect straight to mains.

Is a driver needed?

It depends on the system: 230 V ones connect straight to mains, while low-voltage ones (48 V, 24 V) need a driver. The configurator picks the right one for the luminaires chosen.

How do I work out which parts I need?

Pick a system and open the configurator: you give the mounting and the shape segment by segment and add luminaires, and the rails, joints, end caps and power are worked out for you. Quantities stay editable before the cart.