Surface-mounted magnetic track rail TAMPA 2000 mm – black
Choose this surface rail when the ceiling or wall cannot be opened up. It is a 2000 mm black aluminium profile that sits...
Magnetic systems Magnetic system Tope Lighting
This system's rails, luminaires and connectors only fit each other — parts of other systems will not fit.
The TAMPA Magnetic System is a Tope Lighting 48 V magnetic track family with black and white luminaires, power supplies and connectors. The category holds 64 items: five 2000 mm tracks (surface, recessed plaster-in and stretch-ceiling), 26 accent and linear luminaires from 5 to 36 W, 48 V power supplies of 100 and 200 W, and 29 accessories. Luminaire colour temperature is adjustable within 3000–6000 K and control is by the Tuya smart app or a remote.
Rail sections — the length is made up of several.
Choose this surface rail when the ceiling or wall cannot be opened up. It is a 2000 mm black aluminium profile that sits...
This recessed rail is meant to disappear into the ceiling. Fitted before the finishing coat, it is plastered over so tha...
A 2000 mm magnetic track rail for stretch ceilings, part of the TAMPA system by Tope Lighting. It carries the magnetic f...
This mounting plate secures profiles of the TAMPA magnetic track system to a stretch ceiling and supports a hanging inst...
A white surface rail in the TAMPA series, 2000 mm in length, for ceilings and walls that stay as they are. It mounts on...
Built into the ceiling and covered with plaster, this white recessed rail leaves just the magnetic slot visible along 20...
Choose how many light modules you want and which ones.
A compact accent spot lamp for the TAMPA magnetic track, finished in black painted aluminium. It sits on the rail magnet...
Need a focused beam on one shelf or picture? This 12 W spot light from Tope Lighting sits on the TAMPA magnetic track an...
The strongest spotlight in this TAMPA group, this black head pairs 20 W with 1800 lm of output, enough to light a counte...
A 6 W adjustable grille light that snaps onto the TAMPA magnetic track and puts out 540 lm from its built-in LED. The bl...
This magnetic track adjustable grille lamp from the Tope Lighting TAMPA system snaps onto the magnetic rail and is power...
This linear magnetic track light stretches the light into a line rather than a point, which suits washing a wall or mark...
Where a spot makes a pool of light, this linear TAMPA luminaire draws a line. At 18 W it gives 1620 lm, which works well...
Where a track run needs real output, this 36 W linear light delivers 3240 lm in a slim black body about 1200 mm long, 22...
This system needs a power supply.
This input conductive module is the point where an external driver connects to the TAMPA magnetic track, feeding power i...
This internal power supply feeds the TAMPA magnetic track system with 48 V and carries a maximum load of 100 W at 50/60...
Every TAMPA track needs a feed, and this is the 48 V driver that provides it. It accepts 50/60 Hz mains and can supply u...
An input conductive module for the TAMPA magnetic track system by Tope Lighting. It is the feed point where an external...
This 48 V power supply feeds the TAMPA magnetic track system. It works from 50/60 Hz mains and delivers up to 100 W in t...
The white 48 V power supply for TAMPA track, built for 50/60 Hz mains, with a ceiling of 200 W.It is 311 x 45 x 22 mm an...
Needed only where the track turns a corner, a T or a cross.
Two track sections meet cleanly with this black connection plate. At 80 x 22 mm and just 2 mm thick, it lies almost flus...
Use this black corner connector when a surface-mounted TAMPA magnetic track has to turn a corner on the ceiling. It link...
When a TAMPA track has to leave the ceiling and continue down a wall, this surface corner connector makes the turn.The b...
When a recessed TAMPA track has to change direction, this black corner connector takes care of the turn in the ceiling....
This black recessed closed corner is part of the TAMPA magnetic system and is used for recessed track where a ceiling me...
This corner connector joins two TAMPA magnetic track rails at an angle in a stretch ceiling, so the track can turn a cor...
This stretch ceiling rail connector provides a direct connection between a stretch ceiling rail and the TAMPA magnetic t...
A corner conductive module for the TAMPA magnetic track system by Tope Lighting. It makes the electrical link between tw...
Power feeds, end caps and mounting parts.
A set of 2 end caps for the TAMPA stretch ceiling magnetic rail from Tope Lighting. They close the open ends of the rail...
This PVC strip is an accessory for the TAMPA stretch ceiling rail. It is used when the magnetic track is installed in a...
This set contains two suspension wires for hanging the TAMPA magnetic track system from the ceiling.Use it when the trac...
This RF 2.4G remote control adjusts the colour temperature (CCT) and the brightness of TAMPA magnetic track luminaires,...
This 10 W Bluetooth speaker is an accessory for the TAMPA magnetic track system. It is supplied in black and has a heigh...
This black end cap closes the open end of a surface-mounted TAMPA magnetic track rail.
A black end cap for the recessed TAMPA magnetic rail from Tope Lighting. It finishes the end of the rail run.
This set of two white end caps closes the open ends of a surface-mounted TAMPA magnetic track rail.
TAMPA tracks are sold in 2000 mm lengths, black or white. There are three types: the surface track is fixed to a ceiling or wall, the recessed (plaster-in) track is hidden in the ceiling board, and the stretch-ceiling track is made for stretch-ceiling construction (a black version is offered). A surface track can also be suspended; suspension cables are available for that. Choose the type by your ceiling construction rather than by the luminaires: every TAMPA luminaire clicks onto the magnetic track at any point along it.
The category lists 26 luminaires with power from 5 to 36 W. Accent luminaires (5–20 W) direct light onto a picture, shelf or wall, while linear ones (12, 18 and 36 W) suit broader or longer-run lighting. Where stated, luminous flux runs from 450 to 3240 lm. Bodies are aluminium painted black or white and the protection rating is IP20, so they are meant for dry interiors. Colour temperature is adjustable within 3000–6000 K, and control is through the Tuya smart app or a remote.
TAMPA runs at 48 V, so a 48 V power supply is required. Two ratings are offered, 100 W and 200 W, in black and white. Add up the wattage of every luminaire on the line and leave about 20 % headroom. For example, ten 12 W luminaires (120 W) need at least 144 W, so the 200 W supply fits. A larger layout is best split into two sections with separate supplies.
Accessories include joining plates, surface and recessed corner connectors (ceiling or ceiling-and-wall), electrical connectors, stretch-ceiling parts (straight joint, end piece, PVC strip), an RF 2.4G remote and a 10 W Bluetooth speaker that mounts like a luminaire. End caps for the track are also available. Many accessories come in black and white, so match the colour to the track.
| Part | What to choose |
|---|---|
| Track | Surface, recessed or stretch-ceiling, by ceiling construction |
| Luminaires | Accent 5–20 W, linear 12–36 W |
| Power supply | 48 V, 100 W or 200 W – total luminaire wattage plus about 20 % |
| Control | Tuya smart app or remote |
TAMPA is a 48 V system. Do not combine its tracks and luminaires with other series, especially 24 V ones, even if they look similar. You can plan your line in the configurator and estimate room lighting needs with the lighting calculator.
TAMPA runs at 48 V, so you need a 48 V power supply. Versions of 100 W and 200 W are available. Add up the wattage of all luminaires on the line and leave about 20 % headroom: for example, 120 W of luminaires needs at least 144 W, so the 200 W supply fits.
There are three 2000 mm track types: surface, fixed to a ceiling or wall; recessed (plaster-in), hidden in the ceiling board; and a track for stretch ceilings. A surface track can also be suspended with suspension cables. Choose the type by your ceiling construction.
No. TAMPA is a 48 V system, while TEIDE is 24 V with an ultra-thin 5 mm track. Both the voltage and the track profile differ, so tracks, luminaires and power supplies of the two systems cannot be mixed. Use components from the same system.
According to the manufacturer's description, the luminaires are controlled through the Tuya smart app or a remote, and colour temperature is adjustable within 3000–6000 K. The category also includes an RF 2.4G remote for changing brightness and colour temperature.