Magnetic systems Magnetic system Zambelis
This system's rails, luminaires and connectors only fit each other — parts of other systems will not fit.
24V Magnetic System 6MM runs on 24V DC. The rail carries the power, and luminaires clip anywhere along it and can be moved later without rewiring. That is low voltage, so the system needs a driver rated above the total wattage of the luminaires. Mounting: surface.
Rail sections — the length is made up of several.
This trimless recessed track forms the backbone of the 48 V magnetic lighting system. The aluminium profile is built int...
This surface-mounted magnetic track fixes straight onto the ceiling, so no structure has to be opened up or plastered. I...
The curved section gives the surface-mounted magnetic system its fluid character: straight and rounded parts combine int...
Choose how many light modules you want and which ones.
In this linear module the diodes sit as separate points, set deep into the profile, so side glare is far lower than from...
With its diodes set individually into the profile, this linear module casts a rhythmic line of light rather than a conti...
A short linear module in which a dense row of diodes sits behind grille optics, giving an even band of light while holdi...
This short linear module uses grille optics to give an even band of light without glare. It is meant for shorter stretch...
Experience the future of lighting with this stunning LED strip. Its striking, minimalist design allows it to seamlessly...
A microprismatic diffuser spreads the output evenly along the whole module, so the fitting reads as one continuous band...
The module gives a single continuous band of light: the microprismatic diffuser hides the individual diodes and softens...
The slim cylindrical head tilts and turns to any point you choose, which makes this an accent fitting: artwork, a displa...
This system needs a power supply.
This feeder connects a magnetic track section to its power supply. The one-metre lead gives you freedom to place the dri...
Introduce professional-grade performance into your lighting designs with the 60W LED driver. This sleek, rectangular uni...
Enhance the performance and longevity of your integrated LED lighting systems with this robust 120W LED driver. The desi...
Introduce consistent and efficient power to your lighting installations with the LED Driver 180W. This sleek, rectangula...
Introduce precision and control to your lighting designs with this advanced accessory. Designed for seamless integration...
Experience the ultimate control over your lighting with this sophisticated remote driver. Its rectangular form, with dim...
Introduce unparalleled control and efficiency into your lighting system with the 180W DALI Remote Driver. This essential...
Experience the discreet power of this essential accessory, designed for effortless integration into your lighting setup....
Needed only where the track turns a corner, a T or a cross.
This corner joins two runs of trimless recessed magnetic track at a right angle within a single ceiling plane. It keeps...
This corner extends a trimless recessed magnetic run from the ceiling onto the wall. The two profiles meet at a right an...
This connector joins two surface-mounted magnetic tracks at a right angle within a single ceiling plane. It keeps the pr...
This connector continues a surface-mounted magnetic run from the ceiling onto the wall. It lets light be carried down to...
This straight connector mechanically joins two magnetic track sections and keeps them perfectly aligned, so the joint st...
This straight connector links two magnetic track sections and holds them in alignment, keeping the joint tidy and almost...
This flexible connector joins two magnetic track sections either in a straight line or at an angle. The central section...
This element joins two runs of trimless recessed magnetic track at a right angle, letting the light line follow the peri...
Power feeds, end caps and mounting parts.
This part belongs to the 48 V magnetic lighting system and is matched to the tracks and light modules of the same range....
The system runs on 24V DC, so it will not work without a driver. The driver is sized from the total wattage of the luminaires with headroom — the configurator works that out for you.
Its rails mount as follows: surface. You choose the mounting in the configurator, and both the rails and the accessories follow from it.
No. This system's rail profile and contacts are its own, so a luminaire from another system will not physically fit. Every part of it sits on this page — rails, luminaires, joints and power.
In the configurator you give the mounting and the shape segment by segment and add luminaires — the rails, joints, end caps and power are worked out for you, and the quantities stay editable before the cart.
