Track Systems

In a 230 V track system the rail connects straight to mains and the luminaire locks in with an adapter; a 3-phase rail holds three separately switched groups. Each system's parts fit only each other — a luminaire or joint from another system will not physically fit, so pick within one system.

Mains track 230V 3

Powered straight from the mains, replaceable bulbs, the widest choice of luminaires.

Not sure which system to choose, or how much track you need?

Compare the systems Build a system

About Track Systems

Track Systems

What a complete system needs

  • a rail or a base — as long as the line
  • luminaires or modules — as much light as the room needs
  • joints where the line turns or branches
  • a feed, plus a driver for the low-voltage systems
  • end caps at the ends

Frequently asked questions

Which systems are in this section?

It currently holds 3 systems: Zambelis three-phase system, TK Lighting three-phase system, TK Lighting Tracer single-phase system. Each has its own rails, luminaires and joints, and parts are combined within one system only.

What voltage do these systems run on?

Every system in this section runs on 230V AC.

Is a driver needed?

It depends on the system: 230 V ones connect straight to mains, while low-voltage ones (48 V, 24 V) need a driver. The configurator picks the right one for the luminaires chosen.

How do I work out which parts I need?

Pick a system and open the configurator: you give the mounting and the shape segment by segment and add luminaires, and the rails, joints, end caps and power are worked out for you. Quantities stay editable before the cart.