Modular systems Modular system Zambelis

Plug & Play Modular Pendant System

230V AC
powered straight from the mains
11 parts
2 bases · 9 modules
Zambelis
maker
Build this system All parts Luminaires from 60.00 €

Parts of this system only combine with each other — modules and connectors of other systems will not fit.

Plug & Play Modular Pendant System is a Zambelis pendant lighting system made up of light modules and matching parts supplied without a light source. The category lists 11 products; the integrated LED modules draw 10–15 W and deliver 870–1170 lm at 3000 K, and they dim with a TRIAC dimmer. It suits dining tables, kitchen islands and bars where you want to build the look of the pendant from several parts.

  1. 1 A base or panels The first element the others attach to
  2. 2 Modules and connectors Assembled into the shape you want
  3. 3 Suspension for the height By the height of the room

Bases 2

The base the modules hang from.

Modules 9

Light modules — how many fit depends on the base's power.

All 9 parts

How to choose a Plug & Play modular pendant system

This category holds two kinds of product: light modules with integrated LEDs and parts without a light source. Before ordering, decide what the finished pendant should look like and make sure every part comes from this system.

Light modules and parts without a light source

Modules with an integrated LED give light on their own, while products without a light source are system parts that combine with a light module. Check on the product page which module a part works with and whether it has to be ordered separately. That way you avoid a pendant that is already installed but missing a component. Parts from other brands or other modular systems will not fit.

How much light over a table

Light modules draw 10 to 15 W, deliver 870 to 1170 lm and are 3000 K. One such pendant is usually enough for a small table or bar, while a longer table or kitchen island typically takes two or three in a row. For general room lighting, combine the pendant with ceiling or wall lights. Several pendants over a table are usually spaced evenly, with similar gaps between them and to the ends of the table.

Hanging height

Over a dining table, a pendant is usually hung so that its lower edge is 70 to 90 cm above the tabletop. At that height the light falls on the table without dazzling the people sitting at it or blocking their view of each other. Over a kitchen island or bar it can hang slightly higher so it does not get in the way of people standing. Match the suspension length to the ceiling height before installation.

Dimming and finishes

Light modules dim with a TRIAC (phase-cut) dimmer, so the wall dimmer must be a phase-cut model suitable for LED loads. Black is the most common finish, with white, grey, red and green also available. Aluminium, ceramic, metal, opal glass and clear glass are used, so the same module can be paired with parts of quite different character.

Product typeWhat to check on the product page
Integrated LED modulePower (10–15 W), output (870–1170 lm), TRIAC dimming
Part without a light sourceWhich module it combines with
Installed pendantHanging height of 70–90 cm above the table

Other modular systems: Pendant Opals and TK HONEY COMB.

What a complete system needs

  • modules — as much light as the room needs

Frequently asked questions

What is the Plug & Play modular pendant system?

It is a Zambelis pendant lighting system in which each light is assembled from an integrated LED module and matching parts without a light source. The category holds 11 products, and the light modules are 10–15 W at 3000 K.

Why are some Plug & Play products sold without a light source?

These are system parts that do not light up themselves but combine with a light module to change the look of the pendant. Check on the product page which module the part works with, and order both together so the pendant is complete.

Which dimmer works with Plug & Play pendants?

The light modules dim with a TRIAC, or phase-cut, dimmer. The wall dimmer should be a phase-cut model designed for LED loads, and its rated load should be checked against the combined wattage of the connected pendants.

How high should a pendant light hang above a table?

The lower edge of a pendant usually sits 70 to 90 cm above the tabletop. At that height the light falls on the table without dazzling anyone seated. Over a kitchen island or bar it can hang a little higher so it does not obstruct people standing.

Can Plug & Play parts be combined with other brands' pendants?

No. Plug & Play parts are designed for this Zambelis system's modules, and other brands or modular systems connect differently. Choose all modules and parts from this category.