Bathroom Wall Lights

Bathroom wall lights are wall-mounted fittings protected against moisture and splashing water, designed for the mirror area and general bathroom lighting. The category lists 8 Zambelis products: 7–21 W, 610–2200 lm, 3000 K or 4000 K colour temperature, and an IP44 or IP54 rating. Based on that rating, they suit bathroom zone 2 and areas outside the zones.

How to choose bathroom wall lights

Two things decide a bathroom light: which bathroom zone it will sit in and what it has to light. Establish the zone and the IP rating it requires first, then choose power, colour temperature and finish.

Bathroom zoneMinimum IP ratingSuitable for lights in this category (IP44, IP54)
Zone 0IP67No
Zone 1IP65 (IPX5)No
Zone 2IP44Yes

IP rating and bathroom zones

Lights in this category are rated IP44 or IP54. A bathroom is divided into zones, each normally with a minimum IP rating: IP67 for zone 0, IP65 (IPX5) for zone 1 and IP44 for zone 2. These lights are therefore suitable for zone 2 and areas outside the zones, but not for zone 0 or 1. Confirm the exact zone boundaries in your bathroom and the mounting position with an electrician.

Light at the mirror

Lights draw 7 to 21 W and deliver 610 to 2200 lm. The mirror needs more light than the rest of the room, as this is where people shave, apply make-up and check their face. A light above the mirror or on both sides of it illuminates the face evenly, without deep shadows. You can estimate how much light the whole bathroom needs from its floor area with our lighting calculator.

Colour temperature

Lights are listed at 3000 K warm white or 4000 K neutral white. Warm light creates a calm, relaxed feel for an evening bath, while neutral white shows skin and make-up tones more accurately at the mirror. If the bathroom will have several lights, keep the colour temperature consistent so the walls and tiles do not take on different tones.

Light source, control and finish

Most lights have an integrated LED, and one model takes a replaceable G9 bulb. The dimming method is listed as “none” for all of them, so choose the light level up front from the luminous flux. Bodies are made of aluminium, acrylic, metal, glass and opal glass, in black, white, grey, silver and gold, which makes it easy to match taps and a towel rail.

Other wall lights: directional wall lights and decorative wall lights.

Frequently asked questions

What IP rating does a bathroom light need?

It depends on the zone: zone 0 normally requires IP67, zone 1 IP65 (IPX5) and zone 2 IP44. Lights in this category are rated IP44 or IP54, so they are suitable for zone 2 and for areas outside the zones.

Can a bathroom wall light be installed above a bath or shower?

Not the lights in this category. The space directly above a bath or shower tray counts as zone 1, which normally needs at least IP65 (IPX5). These lights are IP44 or IP54, so fit them in zone 2 or outside the zones, for example by the mirror.

What is the difference between IP44 and IP54 bathroom lights?

Both are protected against splashing water from any direction, shown by the second digit 4. The first digit covers solids: IP44 protects against objects larger than 1 mm, while IP54 is also dust-protected. For bathroom zoning both ratings count the same.

What colour temperature is best for a bathroom mirror?

Neutral white at 4000 K is often chosen for the mirror because it renders skin and make-up tones more accurately. Warm white at 3000 K suits softer general bathroom lighting. This category includes lights in both colour temperatures.

Can these bathroom lights be dimmed?

No. The dimming method for lights in this category is listed as “none”, so their brightness cannot be adjusted. Choose the light level when you buy: output ranges from 610 to 2200 lm, with lower-output models for general light and stronger ones for the mirror.