Magnetic systems Magnetic system Tope Lighting

TAMPA Magnetic System

48V DC
low voltage — needs a power supply
49 parts
6 rails · 14 luminaires
2 m
rail segments
Build this system All parts Luminaires from 33.00 €

This system's rails, luminaires and connectors only fit each other — parts of other systems will not fit.

The TAMPA Magnetic System is a Tope Lighting 48 V magnetic track family with black and white luminaires, power supplies and connectors. The category holds 64 items: five 2000 mm tracks (surface, recessed plaster-in and stretch-ceiling), 26 accent and linear luminaires from 5 to 36 W, 48 V power supplies of 100 and 200 W, and 29 accessories. Luminaire colour temperature is adjustable within 3000–6000 K and control is by the Tuya smart app or a remote.

  1. 1 A rail for the length Segments join up to the length you need
  2. 2 Luminaires on the rail How many and which — by the area to light
  3. 3 Power and connectors for the shape Chosen by luminaire load and rail shape

Rails 6

Rail sections — the length is made up of several.

Luminaires 26

Choose how many light modules you want and which ones.

All 26 parts

Power supplies 6

This system needs a power supply.

Connectors 16

Needed only where the track turns a corner, a T or a cross.

All 16 parts

Accessories 10

Power feeds, end caps and mounting parts.

All 10 parts

How to choose the TAMPA Magnetic System

Track: three mounting methods

TAMPA tracks are sold in 2000 mm lengths, black or white. There are three types: the surface track is fixed to a ceiling or wall, the recessed (plaster-in) track is hidden in the ceiling board, and the stretch-ceiling track is made for stretch-ceiling construction (a black version is offered). A surface track can also be suspended; suspension cables are available for that. Choose the type by your ceiling construction rather than by the luminaires: every TAMPA luminaire clicks onto the magnetic track at any point along it.

Luminaires: accent and linear

The category lists 26 luminaires with power from 5 to 36 W. Accent luminaires (5–20 W) direct light onto a picture, shelf or wall, while linear ones (12, 18 and 36 W) suit broader or longer-run lighting. Where stated, luminous flux runs from 450 to 3240 lm. Bodies are aluminium painted black or white and the protection rating is IP20, so they are meant for dry interiors. Colour temperature is adjustable within 3000–6000 K, and control is through the Tuya smart app or a remote.

Power supply: add up the wattage

TAMPA runs at 48 V, so a 48 V power supply is required. Two ratings are offered, 100 W and 200 W, in black and white. Add up the wattage of every luminaire on the line and leave about 20 % headroom. For example, ten 12 W luminaires (120 W) need at least 144 W, so the 200 W supply fits. A larger layout is best split into two sections with separate supplies.

Connectors and accessories

Accessories include joining plates, surface and recessed corner connectors (ceiling or ceiling-and-wall), electrical connectors, stretch-ceiling parts (straight joint, end piece, PVC strip), an RF 2.4G remote and a 10 W Bluetooth speaker that mounts like a luminaire. End caps for the track are also available. Many accessories come in black and white, so match the colour to the track.

PartWhat to choose
TrackSurface, recessed or stretch-ceiling, by ceiling construction
LuminairesAccent 5–20 W, linear 12–36 W
Power supply48 V, 100 W or 200 W – total luminaire wattage plus about 20 %
ControlTuya smart app or remote

Compatibility

TAMPA is a 48 V system. Do not combine its tracks and luminaires with other series, especially 24 V ones, even if they look similar. You can plan your line in the configurator and estimate room lighting needs with the lighting calculator.

What a complete system needs

  • rail — as many metres as the line is long
  • luminaires — as much light as the room needs
  • joints where the line turns or branches
  • a driver and a feed

Frequently asked questions

Which power supply should I choose for the TAMPA Magnetic System?

TAMPA runs at 48 V, so you need a 48 V power supply. Versions of 100 W and 200 W are available. Add up the wattage of all luminaires on the line and leave about 20 % headroom: for example, 120 W of luminaires needs at least 144 W, so the 200 W supply fits.

How can TAMPA tracks be mounted?

There are three 2000 mm track types: surface, fixed to a ceiling or wall; recessed (plaster-in), hidden in the ceiling board; and a track for stretch ceilings. A surface track can also be suspended with suspension cables. Choose the type by your ceiling construction.

Do TAMPA luminaires fit a TEIDE track?

No. TAMPA is a 48 V system, while TEIDE is 24 V with an ultra-thin 5 mm track. Both the voltage and the track profile differ, so tracks, luminaires and power supplies of the two systems cannot be mixed. Use components from the same system.

How are TAMPA luminaires controlled?

According to the manufacturer's description, the luminaires are controlled through the Tuya smart app or a remote, and colour temperature is adjustable within 3000–6000 K. The category also includes an RF 2.4G remote for changing brightness and colour temperature.